Surface Finish: Bright & smooth surface, without flow lines, slightly oiled to avoid White rusting
1. Alloy: 1050, 1060, 1070, 1100, 3003
2. Temper: O, H12,H14
3. Thickness: 0.36~10mm
4. Diameter: 90-1200mm
5. Package: export standard, covering with brown paper and plastic film then packed with wooden case/pallet
6. Payment Terms: T/T, irrevocable L/C at sight
7. Lead Time: Within 30 days
Applications: aluminium circle for cooker, frypan, reflector of the light, etc.
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ca | V | Ti | Other | Min.A1 |
1050 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.50 |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.60 |
1070 | 0.25 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | 0.04 | - | 0.05 | 0.03 | 0.03 | 99.70 |
1100 | 0.95(Si+Fe) | 0.05-0.2 | 0.05 | - | - | - | 0.10 | - | - | - | 0.05 | 99.00 | |
3003 | 0.60 | 0.70 | 0.5-0.2 | 1.0-1.5 | - | - | - | 0.10 | - | - | - | 0.15 | 96.95-96.75 |
Smooth,Brightly ,No Zone of Fracture ,No Scratched ,No oil Sludge
Quality of Material:Totally free from defects like White Rust, Oil Patches, Roll Marks, Edge Damage, Camber, Dents, Holes, Break Lines, Scratches and free from coil set.
Quick Details
Grade: 1000 Series
Temper: O-H112
Type: Plate
Application: Our circles are excellent material for producing cookware, utensil, po
Thickness: 0.5 mm-4mm
Width: 60-1200 mm
Surface Treatment: Coated
Alloy Or Not: Is Alloy
Name: pressure cooker aluminium circle for household utensils/enamelling
quality: deep drawing
aluminum: >95%
TEMPER: HO H12 H14
THICKNESS(mm): 0.36-10
TENSILE STRENGTH: 60-100
ELONGATION%: ≥ 20
Standard: GB/T91-2002
payment: T/T L/C Westernunion
port: DC Material Deep Drawing Aluminium Disc Circle
Product Description
Product range:
Alloy | Temper | Specification | |
Thickness(mm) | Diameter(mm) | ||
1050,1070 3003 | O,H12,H14,H16,H18,H22 | 0.50—4.0 | 100--1200 |
Product Properties
TEMPER | THICKNESS(mm) | TENSILE STRENGTH | ELONGATION% | Standard |
O | 0.4-6 | 60-100 | ≥ 20 | GB/T3190-1996 |
H12 | 0.5-6 | 70-120 | ≥ 4 | |
H14 | 0.5-6 | 85-120 | ≥ 2 |
Chemical Properties(WT.%)
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ca | V | Ti | Other | Min.A1 |
1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.5 |
1070 | 0.25 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | 0.04 | - | 0.05 | 0.03 | 0.03 | 99.7 |
3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | - | - | 0.15 | 96.95-96.75 |
Diameter Tolerances
Blanked and Sheared Circle Products | |||
Thickness(mm) | Diameter Range (D)(mm) | ||
D <= 455 | 455 < D <=1000 | 1000 < D <=1200 | |
0.4 - 6.0 | +/-.079 | +/-.099 | +/-.015 |
Product Features & description:
Excellent Surface Quality for lighting reflectors.
Excellent deep drawing and spinning quality.
Anodizing Quality and Deep Drawing Quality which is suitable for cookware as well.
RoHS and REACH compliance
Well-Protected Packing
Our Services
1. Reply you any question within 24 hours.
2. 7days per week, 24 hours per day available.
3. Supply free sample
4. After sale service
Process:
Ingot/Master Alloys --- Melting Furnace – Holding Furnace --- D.C. Caster --- Slab ---- Scalper --- Hot Rolling Mill – Cold Rolling Mill – Punching – Annealing Furnace -- Final Inspection – Packing --- Delivery
Quality Control:
The quality policy of Haomei is to establish, implement, and maintain an effective assurance system based on ISO 9001 with the full participation of all employees in the process of continuous quality improvement and quality assurance practices resulting in total customer satisfaction. By encouraging open communication, we are dedicated to achieve true and sincere partnership with both internal and external customers resulting in total customer satisfaction.