Product Description:
The 1050 aluminium circles produced by Shuanglin Jiate Was adopted by CC & DC aluminum coils, thickness range from 0.25mm to 6mm, diameter from 50mm to 1200mm, Alloy number 1050, 1060, 1100, 3003, 3004, 3105, 5052 temper H14, H24, H16 of H18, O, etc. 1060 aluminium circles is used to the process of stretching, spinning, etc., can produce products such as kitchen utensils, electrical appliances, LED lighting shell.
What's 1050 aluminium circles' surface look like?
Be free from Oil Stain, Dent, Inclusion, Scratches, Stain, Oxide Discoloration, Breaks, Corrosion, Roll Marks, Dirt Streaks and other defect which will interfere with use. 1050 aluminium circles'surface without black line, clean cut, periodic stain, roller printing defects, such as other gko internal Control standards.
General Description
1100 1050 3003 5052 hot rolled cookware aluminum discs ,THICKNESS IS THE KEY TO QUALITY
Aluminum is the most common material for cookware, as it is an excellent conductor of heat and is inexpensive compared to copper or stainless steel. Although features such as the lid, handle and finish are important, thickness is the key element of quality. The thicker the pan, the better the heat dispersion, which reduces the chance of "hot spots" occurring. Remember, since an aluminum pan is all aluminum, heat spreads evenly over the total surface, including the side walls. Traditional stainless steel pans spread heat evenly only on the copper or aluminum base.
1100 1050 3003 5052 hot rolled cookware aluminum discs —THE GOOD AND THE BAD
When it comes to quality in plain aluminum pans, it is a story of the "very good" or "very bad." Tour your favourite restaurant's kitchen and you will see primarily plain aluminum pans, especially huge stockpots. Why? Performance. Thick gauge pans needed for rugged commercial use are less expensive to manufacture in aluminum than stainless steel or copper. However, due to aluminum's low cost, it is also perfect for the "very bad" thin-gauge cookware. Most stores do not carry plain aluminum pans.
The is DC and CC quality for the cookware aluminium discs, but the DC quality is better . If you you DC quality can produce perfect smooth cookingware,can use long time.
Quick Detail:
1. Alloy: 1100, 1050, 1060, 3003
2. Temper: O, H12, H14
3. Thickness: 0.3mm ~ 10mm
4. Diameter: 20mm - 1300mm
5. Type: Disk, Round sheet, Circle,Disc
6. Min order: 500kgs each size
7. Payment TT or Irrevocable LC at sight
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | --- | --- | 0.05 | 0.03 | 99.6 |
1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | --- | --- | 0.05 | 0.03 | 99.5 |
1100 | 0.95 | 0.05-0.2 | 0.05 | --- | --- | --- | 0.1 | --- | 99.0 | |
1200 | 1.0 | 0.05 | 0.05 | --- | --- | --- | 0.1 | 0.05 | 99.0 | |
3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | --- | --- | --- | 0.1 | --- | remainder |
Specifications:
Description | aluminum discs |
End Use | kitchen,cookingware,trafic signs, kettle,pot, pan,lamp cover, lighting relective cover |
Alloy | A1050,A1100,A1070,A1060,A3003,A5052 |
Temper | O(soft),H22,H14,H16,H18 |
Thickness | 0.2mm to 6.0mm |
Diameter | 100mm to 1200mm |
Packing | Export seaworthy packing |
Surface | Plain,Bright,No Marks |
Grade | DC and CC |
Tensile Strength | 60-135mpa |
Elongation | As demand |
Factory Equipments:
We own many major equipments, continuous casting and rolling lines, hot rolling lines, cold rolling lines, automatic roller painting lines, automatic embossing production lines, transverse shear production lines, tension leveller, annealing furnaces, cutting machines. With and advanced and stable equipment system, we can guarantee the products quality and shortest delivery time.
Looking for ideal 1050 Aluminium Circles Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the DC Aluminium Circle are quality guaranteed. We are China Origin Factory of Aluminium Circle For Pans. If you have any question, please feel free to contact us.