Description:
Aluminum is relatively soft and will be dinged up and scratched before you know it, by the burner grates or metal utensils. Even anodized aluminum will chip/flake off if you strike it against other hard surfaces enough times. Thin aluminum will warp over time, which can be a problem if you have a flat cooktop. To avoid this, try to buy relatively thick (3mm+) aluminum with either anodization or a stainless steel disc on the bottom or both. Also avoid large temperature shocks like pouring cold water over a hot aluminum pan, as that is a great way to warp your pan.
Aluminum is not compatible with the vast majority of induction cooktops. There are a few expensive, exotic induction cooktops that will (inefficiently) work with aluminum and copper. It is not necessary to season bare aluminum or anodized aluminum.
We are a professional manufacturer of aluminum circle with a exporting quantity 200-300Tons per month. Our main market for aluminum circle are Middle East, Southeast Asian, African and South Amercian. Our aluminum circle is very welcome and qualified for our clients all over the world.
With the help of our expert professionals, we have been able to manufacture, supply and export superior quality Aluminum Circle. The aluminium circles offered by us is designed using high-grade aluminium and advanced machines to remain in tandem with set industry standards and norms. Owing to their features such as durability, these Aluminium Circle are widely demanded by the clients.
1) Alloy number: 1050 1060 1100 1200 3003.
2) Temper available O H12 H14 H16 H18.
3) Application: cookware utensil and basin.
4) Thickness: 0.3-6.0mm. (+/-0.02mm)
5) Diameter: 50-1600mm. (+/-0.5mm)
6) Production treatment: cold rolled or hot rolled.
7) Surface appearance: flat clean surface no whole, scratch, oil dirty and oxidation.
8) Cutting edge: neat cutting edge no burrs
Aluminum disc Surface Finish: Bright & smooth surface, without flow lines, slightly oiled to avoid White rusting. Smooth, Brightly, No Zone of Fracture, No Scratched, No oil Sludge
Quality of Material: Totally free from defects like White Rust, Oil Patches, Roll Marks,
Edge Damage, Camber, Dents, Holes, Break Lines, Scratches and free from coil set.
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ca | V | Ti | Other | Min Al |
| 1050 | 0.24 | 0.40 | 0.05 | 0.05 | 0.06 | / | / | 0.05 | / | 0.05 | 0.03 | 0.03 | 99.5 |
| 1060 | 0.25 | 0.36 | 0.05 | 0.03 | 0.02 | / | / | 0.05 | / | 0.05 | 0.03 | 0.03 | 99.6 |
| 1070 | 0.20 | 0.25 | 0.04 | 0.03 | 0.03 | / | / | 0.05 | / | 0.05 | 0.03 | 0.03 | 99.7 |
| 1100 | 0.95 | 0.94 | 0.05-0.2 | 0.06 | / | / | / | / | / | / | / | 0.05 | 99.0 |
| 3003 | 0.61 | 0.70 | 0.5-0.2 | 1.0-1.5 | / | / | / | / | / | / | / | 0.14 | 96.75 |
| 5052 | 0.40 | 0.40 | 0.10 | 0.11 | 2.2-2.8 | 0.15-0.35 | / | 0.10 | / | / | / | 0.14 | Remain |
We enjoy a good reputation among our customers for our aluminum circle with high quality and competitive price; win high appreciation from our clients with the excellent workman-ship and professional ability. The quality matches with ISO 9001 quality management system.
It is equipped with 5 hot tandem rolling line, 4 cold mill production lines, 4 annealing surface machines and complete finishing equipment.
Our motto and mission is to offer best service for our customer with Heart and Soul.
Quick Detail:
1050 cookware aluminum disc
1. Main For Cookware Used
2. Temper: O(soft), 1/4 Hard H14,H24,etc.
3. Thickness: 0.5mm-3.0mm
4. Diameter: 50mm-1250
5. Purity: 99.5% aluminium
| Temper | Thickness(mm) | Tensile Strength | Elongation(%) | Standard |
| O | 0.4-6.0 | 60-100 | ≥ 20 | GB/T3190-1996 |
| H12 | 0.5-6.0 | 70-120 | ≥ 4 | |
| H14 | 0.5-6.0 | 85-120 | ≥ 2 |
We have strict and professional procedures of production:
1> Before Producing :
Assurance of compliance the standard and material
According to customer's order;
Making production plan according to customer's order ;
Starting producing after receiving the payment from customer
2> Finished production :
Chemical test and Machanical test by our quality department,
Visual examination
Thickness measurment (Continous Ultrasonic)
Lenght dimension control.
Flatness,Straightness,Visual & Dimention check of edge
Weight control
Marking
3> Checking before delivery :
Checking for packages
Certificate of compliance
Checking for Shiping mark and quantity
